Magicard

IDEM9005725 Magicard Rio M ID Card Printer

(No reviews yet) Write a Review
SKU:
IDEM9005725
UPC:
IDEM9005725
$0.00
Frequently bought together:

Description

The Magicard Rio M Card Printer downloads and prints a full card image in less than 20 seconds using advanced bi-directional USB or parallel port. This product has been discontinued. It has been replaced by Magicard endurom Single-Sided Color ID Card Printer w/ Mag Encoder was developed by Magicard. Magicard specalizes in developing high tech products. All ID Focuses on sourcing only the most reliable products. This product was sourced by All ID because it is one of the top rated products manufactured by Magicard.


The Magicard Rio M Card Printer downloads and prints a full card image in less than 20 seconds using advanced bi-directional USB or parallel port. This product has been discontinued. It has been replaced by Magicard endurom Single-Sided Color ID Card Printer w/ Mag Encoder

This product has been discontinued. It has been replaced by Magicard endurom Single-Sided Color ID Card Printer w/ Mag Encoder

The Magicard Rio M Card Printer downloads and prints a full card image in less than 20 seconds using advanced bi-directional USB or parallel port

Features

  • The Card Printer features a unique HoloKote key-controlled anti-counterfeiting card protection.
  • Drop-in dye film loading with automatic detection and set-up for dye film type.
  • The Card Printer has whisper quiet operation thanks to the advanced micro-stepping drive system.
  • The Card Printer is built for both high and low volume use.
  • Easy to use!!
  • Works with a variety of Card Creation Software
Specifications  
Models: Rio M
Product Code IDEM9005725
Description Single-sided, full color printer. High/Low Coervitity Magnetic Stripe Encoder
Print Method Dye Sublimation
Resolution 300 dpi (11.8 dots/mm)
Colors Full Color
Print Speed 20 seconds per card
Single or Double Sided Single
Accepted Card Sizes ISO Standard CR-80
Accepted Card Thickness Thickness: 0.015 inches to 0.063 inches (0.38 mm to 1.6 mm) Capacity: 100 cards 0.030 inches (0.76 mm) minimum in both feed hopper and card stacker
Print Area Length: 1026 pixels (86.9 mm) Width: 642 pixels (54 mm)
Accepted Card Types CR-80
Card Cartridge Capacity N/A
Output Hopper Card
Capacity
N/A
Memory N/A
Encoding Options Proximity Card Encoder, Magnetic Stripe Encoder
System Requirements IBM-PC or compatible, Windows 98/Me/2000/XP, Pentium® class 133MHz computer with 32MB of RAM or higher, 200MB free hard disk space or higher
Interface Separate bidirectional IEEE standard 1284-1994 compatible (Centronics) parallel port and Universal Serial bus (USB rev 1.1) port
Operating Temperature 50 deg. F to 85 deg. F (10 deg. C to 30 deg. C)
Electrical Internal Power Supply autoarranging 90 to 265 VAC 47-63 Hz 100 watts max. load
Dimensions 7.5" W x 8.0" H x 17.5" L 190 mm x 200 mm x 445 mm)
Weight 23 lbs
Software Drivers Supplied with Windows '98, Windows NT, and Windows 2000 driver software with on screen status

HoloKote Information:

Holokote keys are an add on item and are an additional cost to the printer. Protection from forgery is achieved thanks to Ultra's patented HoloKote system which cannot be copied or bypassed. This unique security feature imprints a repeating frosted security logo into the overcoat during the normal print cycle. A standard HoloKote logo is built into the Tango, but increased security can be achieve through the use of an encrypted custom lock which is electronically stored in a miniature 'Compact Flash' sized UltraSecure key. HoloKote cost absolutely nothing to use, and the custom logo turnaround times and set-up charges for UltraSecure keys are minimal.

View AllClose

Warranty Information

null
View AllClose